Customer in Zimbabwe ordered 120 tons refractory clay bricks
In December. 120 tons refractory clay bricks are packed for delivering to customer in Zimbabwe. High quality nice price refractory fire bricks in Topower Refractory.
Generally, the commonly used places for refractory clay bricks are each kiln. Regardless of the brick kiln is still glass kiln, but as a special refractory material, there must be many precautions during this period. what?
1. Because the clay refractory clay bricks cannot be loaded or pressured at high temperature, it can only be used at a lower temperature of the lower part of the pool wall or the bottom of the pool.
2. Important fabrics with complex shapes should be pre -mounted first, and special cement special cement should be used for refractory clay bricks.
3. Leave a little swelling between the refractory clay bricks, and the gap between them should be controlled at 1.5mm-2mm.
4. At the time of application, pay attention to cleaning the dust and dumbs on the inner wall of the kiln, or it will form a loose.
5. The kiln shell should be flat, not to show high and low phenomenon, let alone skew.
6. The locks should be strong. When processing the bricks, the refractory brick cutting machine should be finely processed by the brick machine, and the bricks can be used to process the bricks; the caps under the rotary kiln and the below the brick board will not be less than 70%of the original brick; in the plane on the plane; The joint bricks and curve bricks should not be less than half of the original brick. It is necessary to use the original refractory clay brick to lock the mouth, and the processing surface of the brick cannot be facing the inside of the furnace.
7. It is necessary to deposit in the dry warehouse.
Regardless of whether we start to use clay to resist the bricks, we need to know these precautions. Whether it is before, in use, or other times, as long as we know these aspects, it is very helpful for us.
